BP2786 Tracer 12V 40Ah Lithium Iron Phosphate (LiFePO4) Battery in Pelicase Carry Kit
Weight: 6kg
Dimensions: 300 x 249 x 119mm
IP67 Waterproof Peli™ Case Kit using Amphenol circular MIL Spec connector system.
Professional power packs housed within a protective Peli™ Case. These battery packs are the portable solution, easy to carry and install.
A robust IP67 Waterproof standard case has been pre wired. Built using Amphenol Circular MIL Spec Connector system offering full IP67 protection. The batteries use prismatic cells that create the lightest weight construction. Supplied with built-in internal LED Fuel gauge and charger.
Key Features
PeliTM Case
Built-in internal LED Fuel gauge
Wired and ready to use
Two Amphenol sockets fitted to case
Longer lasting discharge
Faster recharge time
IP67 Waterproof standard
Up to 30A output, by using TR8185
Overcharge and short circuit protected
Temp. range (charging): 0°C – 40°C
Temp. range (discharging): – 10°C – 60°C
24 month warranty
Fuel Gauge
With an internal fuel gauge you can check the power level remaining in the battery. A touch of the button shows how much energy remains and whether you need to recharge.
Internal cushioning protects the battery and its components ensuring you can deliver power in the most demanding of environments.
Two Amphenol Connections
Each Peli™ Case is equipped with two Amphenol connections, each offering up to 20A continuous output at ambient temperature up to 25°C. A combined output of 30A can be achieved if the two connectors are used with a Twin Amphenol Output Lead (TR8185). Please note - if both sockets are being used as output connections the total current must not exceed 30A.
As there are two connections, one can be used for output while the other can be used for charging, effectively making the battery an Uninterruptible Power Supply (UPS). Please note that when using as a UPS the output current must not exceed the charger’s current.
Safety Features
Integrated Electronic ‘Battery Management System’ (BMS) provides the following protection:
Overcharge & over-discharge protection
Thermal protection
Over current protection
Short circuit protection
Includes:
Tracer 12v 40Ah battery in Pelicase
TR8206A - Mains 10A Fast Charger
TR8186 - Anphenol>Bare Ends Cable (1m)
Weight: 6kg
Dimensions: 300 x 249 x 119mm
IP67 Waterproof Peli™ Case Kit using Amphenol circular MIL Spec connector system.
Professional power packs housed within a protective Peli™ Case. These battery packs are the portable solution, easy to carry and install.
A robust IP67 Waterproof standard case has been pre wired. Built using Amphenol Circular MIL Spec Connector system offering full IP67 protection. The batteries use prismatic cells that create the lightest weight construction. Supplied with built-in internal LED Fuel gauge and charger.
Key Features
PeliTM Case
Built-in internal LED Fuel gauge
Wired and ready to use
Two Amphenol sockets fitted to case
Longer lasting discharge
Faster recharge time
IP67 Waterproof standard
Up to 30A output, by using TR8185
Overcharge and short circuit protected
Temp. range (charging): 0°C – 40°C
Temp. range (discharging): – 10°C – 60°C
24 month warranty
Fuel Gauge
With an internal fuel gauge you can check the power level remaining in the battery. A touch of the button shows how much energy remains and whether you need to recharge.
Internal cushioning protects the battery and its components ensuring you can deliver power in the most demanding of environments.
Two Amphenol Connections
Each Peli™ Case is equipped with two Amphenol connections, each offering up to 20A continuous output at ambient temperature up to 25°C. A combined output of 30A can be achieved if the two connectors are used with a Twin Amphenol Output Lead (TR8185). Please note - if both sockets are being used as output connections the total current must not exceed 30A.
As there are two connections, one can be used for output while the other can be used for charging, effectively making the battery an Uninterruptible Power Supply (UPS). Please note that when using as a UPS the output current must not exceed the charger’s current.
Safety Features
Integrated Electronic ‘Battery Management System’ (BMS) provides the following protection:
Overcharge & over-discharge protection
Thermal protection
Over current protection
Short circuit protection
Includes:
Tracer 12v 40Ah battery in Pelicase
TR8206A - Mains 10A Fast Charger
TR8186 - Anphenol>Bare Ends Cable (1m)
Weight: 6kg
Dimensions: 300 x 249 x 119mm
IP67 Waterproof Peli™ Case Kit using Amphenol circular MIL Spec connector system.
Professional power packs housed within a protective Peli™ Case. These battery packs are the portable solution, easy to carry and install.
A robust IP67 Waterproof standard case has been pre wired. Built using Amphenol Circular MIL Spec Connector system offering full IP67 protection. The batteries use prismatic cells that create the lightest weight construction. Supplied with built-in internal LED Fuel gauge and charger.
Key Features
PeliTM Case
Built-in internal LED Fuel gauge
Wired and ready to use
Two Amphenol sockets fitted to case
Longer lasting discharge
Faster recharge time
IP67 Waterproof standard
Up to 30A output, by using TR8185
Overcharge and short circuit protected
Temp. range (charging): 0°C – 40°C
Temp. range (discharging): – 10°C – 60°C
24 month warranty
Fuel Gauge
With an internal fuel gauge you can check the power level remaining in the battery. A touch of the button shows how much energy remains and whether you need to recharge.
Internal cushioning protects the battery and its components ensuring you can deliver power in the most demanding of environments.
Two Amphenol Connections
Each Peli™ Case is equipped with two Amphenol connections, each offering up to 20A continuous output at ambient temperature up to 25°C. A combined output of 30A can be achieved if the two connectors are used with a Twin Amphenol Output Lead (TR8185). Please note - if both sockets are being used as output connections the total current must not exceed 30A.
As there are two connections, one can be used for output while the other can be used for charging, effectively making the battery an Uninterruptible Power Supply (UPS). Please note that when using as a UPS the output current must not exceed the charger’s current.
Safety Features
Integrated Electronic ‘Battery Management System’ (BMS) provides the following protection:
Overcharge & over-discharge protection
Thermal protection
Over current protection
Short circuit protection
Includes:
Tracer 12v 40Ah battery in Pelicase
TR8206A - Mains 10A Fast Charger
TR8186 - Anphenol>Bare Ends Cable (1m)